Add to Cart
1.The heater sensor deep into the most front end of the soldering tip, not only able to respond the accurate temperaterature rapidly, but also reduce the temperature drop during soldering, increase the use life of soldering iron.
2.Heater power up to 70 ~ 100 watts:More heat compared to other soldering tips in the market, more effectively provide enough heat required by soldering point or area.
3.Clamp design to realize quick replacement of soldering tips, meanwhile avoid position deviation during tips replacement.
4.Unique temperature control design can reduce the overshoot, at the same time force the heating temperature function,guarantee the soldering performance by using of low temperature.
Unique turning cylinder design makes iron set contact soldering points gently, so as to decrease the percentage of solder ball incurred.
5.Tsutsumi soldering tip features with excellent tip design as to to keep a stable temperature control
6.The durability is guaranteed by proper thicker plating, excellent soldering performance.
7.The temperature drop during the soldering becomes smaller, the heat is hard to run off.
8.The tip's long life can save the production cost of consumables, popular with endusers.
Made with pure oxygen-free copper
Long time electroplating makes the plating layer more denser, the life time is longer than other tips
Short lead time for standard robot tips
The cost is much lower than original tips
Custom made available
Offer sample for testing
The soldering tip of Tsutsumi is enabling temperature control stabilized by the design with the sufficient balance like each part.
The shape of soldering tip serves as an ideal thermal storage part can give heat capacity to the end of the tip.
New type soldering tip (TKH series) has the better heat conduction efficiency at a tip compared with the TKN series, and by forming high-fever capacity, is effective in stabilizing tip temperature, and serves as specification which contributes to the correspondence to lead-free soldering or a high-fever capacity board.
The shape of Tsutsumi soldering tip serves as an ideal thermal storage part which gives heat capacity to the end of tip.
New type soldering tip – TKH series – has better heat conduction efficiency than TKN series (previous type, which is still very popular), and by forming high-fever capacity, it is effective in stabilizing tip temperature, and serves as specification which contributes to the correspondence to lead-free soldering or a high-fever capacity board.
Since temperature control has stable performance of tip temperature. in order to insert CA unit to fix the tip quickly, the temperature drops during soldering point becomes small, and the soldering unit realizes long-life of the tip in the same conditions!
www.leisto.com